Shta posedujete od vijura? [fotke]

[HrastProgrammer]

Dobra kupovina

Mislim da ti za mikrofon ipak treba nekakvo pretpojačalo. Ima? u manualu (novijoj verziji) sve to dosta dobro obja?njeno na stranama 110-112.

Ukratko:

1. Connect the audio input of the Q with a 1/4-inch mono or stereo plug. In practice, a Y cable is perfect for a stereo or dual mono signal input for the vocoder. Please be sure to use a line signal. If you want to use a microphone be sure to use a pre amplifier to generate a line signal.

2. With the Input Gain parameter in the Global menu you can increase the sensitivity. Please refer to the chapter ?Global Parameters? on page 143 for more details.

3. Select a sound program. We recommend the use of sustained pad or string sound.

4. Select the Vocoder as effect type for FX slot 1 or 2. Initialize the vocoder effect by holding down the Shift button and pressing the corresponding FX Edit button.

5. Feed the Q?s audio input with your external signal and trigger one or more notes. You should hear the vocoder effect. We recommend using speech or drum loops as external audio material.

6. Try different settings of the vocoder parameter and tune to taste.

Sjećam se da je meni radilo kad sam svojevremeno isprobavao ...