Ajd Sad Problem Ovoooooliki

[SumAnuT]

Taj proces je zaduzen za windows file protection.
Probaj prvo da disejblujes WFP u registryju:

Disabling Windows File Protection


You may disable WFP by setting the value SFCDisable (REG_DWORD) in HKEY_LOCAL_MACHINE\ SOFTWARE\ Microsoft\ Windows NT\ CurrentVersion\ Winlogon. By default, SFCDisable is set to 0, which means WFP is active. Setting SFCDisable to 1 will disable WFP. Setting SFCDisable to 2 will disable WFP for the next system restart only (without a prompt to re-enable).

Important: You must have a kernel debugger attached to the system via null modem cable (for example:I386kd.exe or Windbg.exe) to use SFCDisable = 1 or SFCDisable = 2.

After WFP is disabled using the SFCDisable = 1 setting, the following message will appear after logon:

Warning! Windows File Protection is not active on this system. Would you like to enable Windows File Protection now? This will enable Windows File Protection until the next system restart. .

Clicking Yes will reactivate WFP until the next system restart. This message will appear at every successful logon until SFCDisable is set to 0.