opet nurndo pitanje a i vst ...

[dvuckovic]

Preporucujem usi. Analyzer, obzirom da si pocetnik, ionako neces znati da citas, a onda ces samo da gledas u njega i da mislis "odlicno je to, vidis kako je fino sareno". Mnogo ti je korisnije da aktivno slusas, i da uporedjujes to sto si izmiksao na sto vise razlicitih zvucnika/sistema.

[Eon]

da kao sto rece dvuckovic treba prvo da usi naviknes na zvuk i raspored frekvencija pa posle da kombinujes sa ocima...samo oci znaju da varaju (ne veruj ono sto vidis samo ono sto cujes :roll: )imaj u vidu da ako koristis analyzer samo ali samo ga koristi za skidanje frekvencija za pocetak i kada to uradis dobro preslusaj uradjeno kasnije se ufuravaj da sve odslusano i gledas ali ne preteruj sa gledanjem jer ponavljam usi su ovde bitne

[SumAnuT]

nasao sam ovaj waves pack , zahvaljujuci puratoru ... mislim da ce posluzhiti

ok necu previshe da gledam ... , za to su mi i trebali za skidanje nepotrebnih frekvencija ...

imam pitanjce jedno ... koji su frekventni opsezi za :

kick ?
bas?
mid bas?
ostale ''instrumente''?
ritmove?

ako mozesh ti eone da mi odgovorish ... poshto ako me pamcenje dobro sluzhi a trebalo bi ... i ti pravish neki trance pa znash otprilike shta ovi ''instrumenti'' sve mogu da budu ...

neznam bash kolko je pametno da treniram ushesa na dvosistemcima srednje klase

[puRe]

Jeste da mozda ne odgovara na tvoje pitanje ali sam siguran da ce ovo nekome da koristi...uostalom ne moze da skodi

Kick Drum
Any apparent muddiness can be rolled off around 300Hz. Try a small boost around 5-7kHz to add some high end.

50-100Hz__Adds bottom to the sound
100-250Hz__Adds roundness
250-800Hz__Muddiness Area
5-8kHz__Adds high end prescence
8-12kHz__Adds Hiss

Snare
Try a small boost around 60-120Hz if the sound is a little too wimpy.
Try boosting around 6kHz for that 'snappy' sound.

100-250Hz__Fills out the sound
6-8kHz__Adds prescence

Hi hats or cymbals
Any apparent muddiness can be rolled off around 300Hz.
To add some brightness try a small boost around 3kHz.

250-800Hz__Muddiness area
1-6kHz__Adds presence
6-8kHz__Adds clarity
8-12kHz__Adds brightness

Bass
Try boosting around 60Hz to add more body. Any apparent muddiness can be rolled off around 300Hz.If more presence
is needed, boost around 6kHz.

50-100Hz__Adds bottom end
100-250Hz__Adds roundness
250-800Hz__Muddiness Area
800-1kHz__Adds beef to small speakers
1-6kHz__Adds presence
6-8kHz__Adds high-end presence
8-12kHz__Adds hiss

Vocals
This is a difficult one, as it depends on the mic used to record the vocal. However...

Apply either cut or boost around 300hz, depending on the mic and song.
Apply a very small boost around 6kHz to add some clarity.

100-250Hz__Adds 'up-frontness'
250-800Hz__Muddiness area
1-6kHz__Adds presence
6-8kHz__Adds sibilance and clarity
8-12kHz__Adds brightness

Piano
Any apparent muddiness can be rolled off around 300Hz. Apply a very small boost around 6kHz to add some clarity.

50-100Hz__Adds bottom
100-250Hz__Adds roundness
250-1kHz__Muddiness area
1-6kHz__Adds presence
6-8Khz__Adds clarity
8-12kHz__Adds hiss

Electric guitars
Again this depends on the mix and the recording. Apply either cut or boost around 300hz, depending on the song and sound.
Try boosting around 3kHz to add some edge to the sound, or cut to add some transparency. Try boosting around 6kHz to add
presence. Try boosting around 10kHz to add brightness.

100-250Hz__Adds body
250-800Hz__Muddiness area
1-6Khz__Cuts through the mix
6-8kHz__Adds clarity
8-12kHz__Adds hiss

Acoustic guitar
Any apparent muddiness can be rolled off between 100-300Hz. Apply small amounts of cut around 1-3kHz to push the image
higher. Apply small amounts of boost around 5kHz to add some presence.

100-250Hz__Adds body
6-8kHz__Adds clarity
8-12kHz__Adds brightness

Strings
These depend entirely on the mix and the sound used.

50-100Hz_Adds bottom end
100-250Hz_Adds body
250-800Hz__Muddiness area
1-6hHz__Sounds crunchy
6-8kHz__Adds clarity
8-12kHz__Adds brightness

[SumAnuT]

sta bih ja bez tebe puratore

hvala!

[Eon]

da to je to sto purator pokaza..za modernije produkcije navescu ti primer recimo za kick...

ja kick stavljam na 20hz pa ga razvucem do 1 khz (ovo je sve preko -6db) pa onda spustam frekvencije koje cu da upotpunjujem sa drugim zvukovima.
recimo za brz i "odlucan" kick ostavi 1khz i recimo negde 300hz kao i sve ispod toga pa stavi neki ride cymbal na side chain compresiju da bi dobio jedan zvuk plasticnog kicka...kombinuj malo
bass je posebna prica njega trebas ostaviti zajedno sa kickom...mnogi ljudi se bune oko toga "kako da stavim kick i bass ako su na istim frekvencijama,a oba trebaju da prave groove?"
odgovor.kick u tranceu guraj na vise frekvencije dok bass ostavljaj na nizim sve dok ne cujes harmoniju ta dva zvuka tj.bass treba da tera kick...uzmi za primer paul van dyka i neke njegove stvari
mid bass ili ti neki zvukovi koji tu stoje ces uvek stavljati posle visokih i srednjih...to sam negde procitao jer se posle lakse i bolje uklope u mix
itd itd....

kombinuj pa javi sta si uradio ustvari posalji pa da se cuje

[SumAnuT]

hocu naravno samo trebace mi malo vremena da se odomacim u nuendu ...