Recenzija: Alesis M1 active MKII - biamplified monitors

[ANITA]

S obzirom da su nazivi razlicitih monitora stvarno slicni.. a ne radi se o istom proizvodu... paste-am svoj post s drugog dijela na ovaj gdje se radi o ovim monitorima.

Alesis Monitor One MK2 Studio Monitors

$199.95



Drivers: Magnetically shielded, 6.5" low frequency drivers with a mineral filled polypropylene cone and a damped linear rubber surround; magnetically shielded, 1" silk-dome tweeter
Crossover: 2 kHz, 2nd-order fillers, (12dB per octave)
Frequency Response: 45 Hz - 20 kHz +/- 3dB
Power Handling: 120 watts program, 200 watts peak (using EI4-426A method)
Nominal Impedance: 4 ohms
Sensitivity: 88 dB SPL @ 1 watt and 1 meter on axis
Construction: Front baffle: powder coating on 1" MDF
Cabinet: Vinyl laminate on 5/8" MDF
Connectors: 5-way binding posts on 0.75" centers ? can accept heavy-gauge speaker wire, banana plugs, spade plugs
Dimensions (H x W x D): 15 x 8.5 x 10 in.
Weight: (1) 15 lbs.


Alesis M1 Active mk2 Biamp Monitors (Pair)

$399.95




Low Frequency Driver: 6.5 in. non-woven carbon fiber with Santoprene surround and dual magnet shielded configuration
High Frequency Driver: 1 in. silk dome with medium viscosity ferrofluid coolant and dual magnet shielded configuration
Crossover: 1500Hz, 8th-order, 48dB/octave filters
Input Impedance: 20k_ balanced, 10k_ unbalanced
LF Filter: 2nd order, "optimal Q" high pass, +1dB boost@50Hz
LF Amplifier: 75 watts, 8_ load
LF Amp Distortion: less than 0.03% thd @ 30w lf amp slew rate:<>19V/?sec
LF Amp S/N Ratio: >110dB, ref. 60W @ 8_, A-wtg., 1kHz
HF Amplifier: 25 watts, 4_ load
HF Amp Distortion: less than 0.06% thd @ rated power lf amp slew rate less than 9V/?sec
HF Amp S/N Ratio: >112dB @ rated output
Frequency Range: 38 Hz - 23.5 kHz (-10dB point)
Connectors: Combination XLR-1/4 in. jack with input level control
Dimensions (H x W x D): 15 x 8.5 x 9.75 in. (216 x 381 x 248 mm)
Weight: 19.5 lbs. (8.9 kg)