Isitina o fiberglasu

[AcaHari]

What is Fiberglass Is Fiberglass Insulation Safe? What Steps Do I Take To Reduce Exposure? Installation and Clean-Up What is Fiberglass Fiberglass is a man-made product that is composed of natural ingredients such as sand and recycled products such as window glass and bottles. The ingredients are melted and spun to create small strands of fiberglass that together form "glass wool". Fiberglass insulation has been used since the 1930s and is now the most widely used home insulator. As an energy saver, fiberglass insulation saves the consumer money and helps keep buildings warm in winter and cool in the summer. Insulation saves energy and reduces the demand for new power plants, which reduces emissions of air pollutants to the environment and helps prevent global warming. To maximize energy efficiency, it is important to reduce air leaks that may occur around any areas in your home that are not sealed. These may include windows; doors; fireplaces; heating, ventilation and air conditioning ductwork; and perimeter joints. Leaks can be controlled with the use of housewrap, caulking and sealing of areas with leaks. Fiberglass insulation also helps control noise in buildings, cars, and appliances. Fiberglass insulation is commonly used in furnaces and duct systems that deliver air to occupied buildings and homes and effectively minimizes transmission of noise. Is Fiberglass Insulation Safe? Yes, fiberglass building insulation is safe when it is properly installed. Direct contact with fiberglass materials or exposure to airborne fiberglass dust may irritate the skin, eyes, nose and throat. Fiberglass can cause itching due to mechanical irritation from the fibers. This is not an allergic reaction to the material. Breathing fibers may irritate the airways resulting in coughing and a scratchy throat. Some people are sensitive to the fibers, while others are not. Fiberglass insulation packages display cancer warning labels. These labels are required by the U.S. Occupational Safety and Health Administration (OSHA) based on determinations made by the International Agency for Research on Cancer (IARC) and the National Toxicology Program (NTP). 1994- NTP listed fiberglass as "reasonably anticipated to be a human carcinogen" based on animal data. 1998- The American Conference of Govern- mental Industrial Hygienists reviewed the available literature and concluded glass wool to be "carcinogenic in experimental animals at a relatively high dose, by route(s) of administra- tion, at site(s), of histologic type(s) or by mechanism(s) that are not considered relevant to worker exposures". 1999- OSHA and the manufacturers volunta- rily agreed on ways to control workplace exposures to avoid irritation. As a result, OSHA has stated that it does not intend to regulate exposure to fiberglass insulation. The voluntary agreement, known as the Health & Safety Partnership Program includes a recom- mended exposure level of 1.0 fiber per cubic centimeter (f/cc) based on an 8-hour workday and provides comprehensive work practices. 2000- The National Academy of Sciences (NAS) reported that epidemiological studies of glass fiber manufacturing workers indicate "glass fibers do not appear to increase the risk of respiratory system cancer". The NAS supported the exposure limit of 1.0 f/cc that has been the industry recommendation since the early 1990s. 2001- The IARC working group revised their previous classification of glass wool being a possible carcinogen. It is currently considered not classifiable as a human carcinogen. Studies done in the past 15 years since the previous report was released, do not provide enough evidence to link this material to any cancer risk. What Steps Can I Take to Reduce Exposure? There are several ways you can minimize exposure to fiberglass material. Be sure to "work smart? when insta- lling fiberglass insulation in your home. Follow similar safety steps any time you remove fiberglass insulation or undertake a home improvement project that involves working with or around fiberglass insulation. During installation follow the directions on the package as well as these safety steps: Skin Wear loose-fitting, long-sleeved clothing and long pants. Do not tape sleeves or pants at wrists or ankles. Wear gloves. Do not scratch or rub your skin if fiberglass particles accumulate on your skin. When you finish, wash skin or shower with mild soap and warm, running water. Eyes Wear safety glasses with side shields. Wear a hat. Do not rub your eyes while you are working with fiberglass. Be sure to complete clean up before rubbing your eyes or scratching your skin. Nose, Mouth, and Throat If you experience irritation of the nose, mouth, or throat you should consider wearing an "N 95" particulate respirator approved by the National Institute for Occupational Safety and Health. If you are working in a dusty environ- ment, or are working with fiberglass insulation overhead, a disposable dust respirator may be a good idea. Be sure to read and follow the respirator manufacturer's instructions regarding selection and proper use of respirators. Most home improvement stores sell these types of disposable respirators. Installation and Clean-Up Follow these steps and be sure to read and follow manufacturer's instructions carefully. Keep your workspace clean. Do not handle fiberglass scrap more than necessary. Have a waste bin or plastic trash bag close by at all times. Use correct cutting tools such as a sharp utility knife and a straight edge. When cleaning your work area, be orga- nized in your approach so that you do not spread fibers back into an area you have cleaned previously. Make sure all installed insulation is never left exposed in an occupied area. If the insulation does not have any protective covering or facing, it may cause irritation to anyone coming into direct contact with the glass fibers. If the insulation has a paper or foil covering it presents a potential fire hazard. Change work clothes after you finish your fiberglass insulation project. Wash work clothes separately and wipe out washer after cycle is complete. As with any other building material the fiberglass insulation has to be clean and dry. If insulation is wet, it can become contaminated with mold. If a remodeling project involves removal of fiberglass insulation, follow the installa- tion safety steps listed above. Da ne bude zablude ovo je i te kako korisno

[NLP]

Kamena vuna je bolja u pogledu na staklene mikro čestice.
Ali mora biti nekoliko veče težine odnosno na staklenu vunu, da bi se dobili slični akustički rezultati.
A ionako moraš "zatvoriti" staklenu i kamenu vunu sa "akustičkom" tkaninom koja zadržuje airborne čestice. Gola kamena vuna baš nije privlačna