aams v2.0

[liman021]

da li neko koristi ovaj stand alone program.aams v2.0(auto audio mastering system).drug koji ga koristi mi kaze da analizira celu stvar i odradjuje mastering(mogu se birati preseti rock,pop,electro...i madjusobno povezivati)najoptimalnije moguce.na njegovom kompu odradjuje wav pola sata-sat.koristi svoje master compress,eq,....

[Talino]

pola sata, sahat? Da ne radi na pentijum kecu?

[Moritz]

Im'o sam i ja takav kompjuter pa sam ga prodo'o.....

[arajlo]

Mastering ne odradjuje sam nego ti sugestira koje omjere trebas postaviti s tim da mozes eq spremiti kao elemental firium preset, a kompresor moras rucno podesavati (npr. ozone3). Dobra stvar za one sa umornim usima i losim monitorima...

[DADDY Z]

Originally Posted by arajlo

Mastering ne odradjuje sam nego ti sugestira koje omjere trebas postaviti s tim da mozes eq spremiti kao elemental firium preset, a kompresor moras rucno podesavati (npr. ozone3). Dobra stvar za one sa umornim usima i losim monitorima...

Yep...to je bilo u verziji 1.0...u 2.0 sve odrađuje...a za ostali prvo proverite o kom softveru je reč pre nego postujete komentare...

[arajlo]

DJ Z mislim da se varas, AAMS2 aplicira podesenja samo za plejbek da vidis razliku. Render se nemoze vrsiti na fajl, koliko znam...

[DADDY Z]

Originally Posted by arajlo

DJ Z mislim da se varas, AAMS2 aplicira podesenja samo za plejbek da vidis razliku. Render se nemoze vrsiti na fajl, koliko znam...

probaj...renderi?e 5-6 file-ova(EQ,COMP,LIMITER,itd...)..i na kraju masterizovan...btw..zato to i traje toliko dugo..

[DADDY Z]

možda ja nisam nešto dobro razumeo:
Mastering fully automatic

On the Quick Start Tab is a button called 'Auto Master Audio File' , click on the button.
The mastering process of this 'On the Fly' button is quite simple, alltough you have to understand the basics of AAMS.
For this, we recommend you to read the full manual when ever you can and make yourselfves familliar with the AAMS program.
A window will pop-up asking you for an *.wav or *.aam or *.afd file.
You can select a *.wAv file for import now or change the filetype below to *.AAM or *.AFD.
As AAMS does need some input before the automatic mastering process starts, you are asked to input a file.
This file will represent the Source.

This function will ask you first for the Source material and you can load 3 different file extensions into AAMS;

1. A *.Wav Format 16 Bit 44100hz Stereo audio file.
2. A Source *.aam analyzed AAMS file.
3. A AAMS Fulldata File.


Loading a Wav Format 16 Bit 44100hz Stereo file as Source

When you load a Wav Format 16 Bit 44100hz Stereo file you will be asked to Load a Reference *.aam file also.
The reference files can be found in the AAMS Database of more then 100+ Style Presets allready made and come with AAMS installation.
The reference file you choose is important and be sure what preset to choose before proceding.
Then AAMS Analyzer will Analyze the loaded Wav Format 16 Bit 44100hz Stereo file into an *.aam file with the same name.
The statusbar below will show the progression status of AAMS Analyzing the audio file from begin to end.
Do not use AAMS until analyzing is finished. When AAMS Analyzer is finished, AAMS Suggestions are automaticly calculated for
Equalizing, Compression and Loudness. AAMS will proceed with processing the loaded Wav Format 16 Bit 44100hz Stereo file by making use
of the DSP-EQ, DSP-Compressor and DSP-Loudness Automatic functions. Each time a process is finished you can see this in the Master Tab.
Please wait out the full time it takes AAMS to process, when the statusbar is processing and the sign below says 'Busy' and colors Red.
Afther Processing is fully finished, the loaded Wav Format 16 Bit 44100hz Stereo file is mastered and written as a new Wav Format 16 Bit 44100hz Stereo file
with the extension 'Master_wav'.


Loading a *.aam analyzed AAMS Analyzer File as Source

Before hitting the 'Auto Master Audio File' button, you should first have a *.aam file ready made with the AAMS Analyzer.
When you load a *.aam file as Source, you will be asked to Load a Reference *.aam file also.
The reference files can be found in the AAMS Database of more then 100+ Style Presets allready made and come with AAMS installation.
Most likely this way is faster and you can check the Source and Reference before mastering.
The statusbar below will show the progression status of AAMS Analyzing the audio file from begin to end.
Do not use AAMS until analyzing is finished. When AAMS Analyzer is finished, AAMS Suggestions are automaticly calculated for
Equalizing, Compression and Loudness. AAMS will proceed with processing the loaded Wav Format 16 Bit 44100hz Stereo file by making use
of the DSP-EQ, DSP-Compressor and DSP-Loudness Automatic functions. Each time a process is finished you can see this in the Master Tab.
Please wait out the full time it takes AAMS to process, when the statusbar is processing and the sign below says 'Busy' and colors Red.
Afther Processing is fully finished, the loaded Wav Format 16 Bit 44100hz Stereo file is mastered and written as a new Wav Format 16 Bit 44100hz Stereo file
with the extension 'Master_wav'.

Loading a *.afd AAMS FullData File

The AAMS Fulldata File is made out of a Source and Reference that has been previously selected and saved with AAMS.
There is no need to select the Source or Reference because these are saved within the AAMS Fulldata file.
The statusbar below will show the progression status of AAMS Analyzing the audio file from begin to end.
Do not use AAMS until analyzing is finished. When AAMS Analyzer is finished, AAMS Suggestions are automaticly calculated for
Equalizing, Compression and Loudness. AAMS will proceed with processing the loaded Wav Format 16 Bit 44100hz Stereo file by making use
of the DSP-EQ, DSP-Compressor and DSP-Loudness Automatic functions. Each time a process is finished you can see this in the Master Tab.
Please wait out the full time it takes AAMS to process, when the statusbar is processing and the sign below says 'Busy' and colors Red.
Afther Processing is fully finished, the loaded Wav Format 16 Bit 44100hz Stereo file is mastered and written as a new Wav Format 16 Bit 44100hz Stereo file
with the extension 'Master_wav'.


Auto Mastering Progression

Goto the Mastering Tab.
When you finished Loading all files, then the DSP Processing will start automaticly.
There must be an Source and Reference loaded.
Depending on the information AAMS has about the Audio File that needs processing, AAMS will choose a file when it exists,
or AAMS will ask you for the Audio File that needs processing.
You can see what files where loaded in the Mastering Tab, also the progression status is shown over here.
Each time a DSP process is busy, the corresponding process will turn to 'Busy'.
While the process is 'Busy' you can also see below the 'Busy' signal colored Red.
This means AAMS is busy DSP processing the corresponding Audio File.
Do not use AAMS functions while the 'Busy' signal is Red and await the full mastering process.
The Master Tab will show 'Ready' when an DSP Processor is ready.
When the next DSP Processor is called this will read 'Finished' indicating that the corresponding Audio File was created and saved.
The DSP-EQ, DSP-Compressor and DSP-Loudness all need to 'Finish' before the Mastering Tab will show a completed Mastering Job.
At the end the last file that has been saved is the DSP-Loudness Audio File that has been created.
Most likely this has got the Audio File Name + '_EQ_C_B_L.wav' attached to it, this is the Mastered File.


Rules

There are some rules that do apply to Mastering correct.
The DSP-Compressor's AGC Control needs some time to adjust it'self and this takes some time for the correct Compressor Levels are found.
Audio Files that are short (Less then 2 minutes or so) can make the AGC Control of the DSP-Compressor unsteady and it might take some more time
to get all the Green Leds to come up. With files that are larger then 2 minutes this is likely not to occur,
the AGC Control has more time to investigate and hunt down the correct levels.
Maybe a solution is doing the mastering job for short files manually with AAMS and use a half automated / half manual approach.
Or you can make the Audio File longer then 2 minutes, using an audio editor and copy audio a few times, so that the track repeats it selfves and
will be longer then 2 minutes.
Most tracks are longer then 2 minutes and this will not be a problem, as long as the AGC Control finds the correct levels.


Processing Busy/Stop

As long as AAMS is 'Busy' and the mastering process is not finished, it is better to wait out the process, do not use AAMS.
You can visit some Tabs while AAMS is busy, but when you need to click on AAMS functions while the mastering process is busy, press stop first!
If you do press 'Stop' the mastering process will end interrupted, this will ensure you that DSP Processed files are not written fully and the
mastering process did not finish. It can happen that files are Broken or not of full lenght.


Processing Speed

The time from start to end of the mastering process can be longer then you expect, it depends on the Computer / Processor Speed.
Also the DSP-Compressor take more time to process when more Multibands are Setup. The lower the multibands in the DSP-Compressor Setup,
the lower the DSP Processor will indicate a percentage % below, next to the status line. For slower computers we recommend setting the Multibands in the
Setup Tab of the DSP-Compressor lower (4 Multibands or lower), do this before you start Mastering.
We recommend to Play an audio file first with the DSP-Compessor and see if your computer can handle the calculations and speed of AAMS,
if not set the Multibands to lower values.

File extensions

A DSP-EQ processed file has the extension '_EQ.wav'.
A DSP-Compressor processed file has the extension '_C.wav'.
A DSP-Loudness Balanced processed file has the extension '_B.wav'.
A DSP-Loudness Gain processed file has the extension '_L.wav'.
When you make use of any DSP Processor , each time the extension is written again, this means you can have files alike 'Example1_EQ_EQ_C_B_B_L.wav' created.
The extensions will show how many times each DSP processor was being used.
You can rename or copy the file to Example1_Master.wav' to make clear this is the last file with the end result.

[Max]

a kakav je rezultat :o



Pozdrav

[DADDY Z]

Originally Posted by Max

a kakav je rezultat :o



Pozdrav

Zavisi koliko si zahtevan..po meni radi odlično..ali postoji to ograničenje na 16bit/44.1kHz...