[Eon]

DC Filter M/S
Removes any existing DC component
from a signal. Both mono and stereo
versions of the filter are provided.

Controls

Gain
The DC Filter operates with 6 dB
headroom in order to avoid distortion.
Typically, these extra dB can be
recovered following DC removal via the
amplifier stage which follows. However,
if the peak-indicator LED begins lighting,
the Gain control should be backed off
slightly.

Signal Peak
The signal LED (green) indicates all
signals above the level of -96dB. The
Peak LED indicates the presence of
distortion in the amplifier stage following
the DC filter.

Ovo sam nasao u pulsarovom manualu, ne odgovara na pitanje ali navodi na zakljucke (bar deo njih)