the system
This 2 way coaxial system is housed in a compact bass reflex cabinet.
Due to the nature of the coaxial driver the BLACKs can be placed in any position, without changing it's superior characteristics, upright, rotated at +/-90 degrees and 180.
Two identical 100W amplifiers supply a homogenous fidelity. This is one of the reasons why this model can be used in nearly any pro audio application.
The low frequency performance is excellent, and can be expanded if needed,
by adding an EMES AMBER HR Sub.
driver technologie
For the woofer/midrange driver, we use a 17cm polypropylene membrane with
low loss suspension. Inside the woofers coil/magnet system, we integrate a
25mm textile dome. By doing so we have created a 2-way driver where the two
coils are mechanically time aligned and the sound field is generated as one!
The complete magnet system of this driver is shielded by adding a second
magnet and surrounded by a ?-metal cap!
the electronics
Two complete, separated channel strips are used to keep the electronic
crosstalk to a minimum. Each of these has an identical amplifier - this means the tweeter has the same amount of power in the back as the woofer. A design feature that we never want to miss, because distortion created by different designs or varying power output is not what we want! Our so called "quick delivery" - digital power- supplies are built with the same goal in mind. It works 2,000 times faster than an analog device and is far lighter in weight. On the back you will find 16 step dip switches for the input sensitivity, low fq control (-6 to + 4 dB), and the high fq section (-4 to +4 dB) .
System BLACK tv HR active
construction 2 way bass-reflex
concept coaxial near filed monitor
fc responce free field 43 - 20.000 Hz +/- 2,5 dB
fc responce in wall not recommended
system low fc responce 42 Hz - 3 dB
max. sensitivity 107 dB
max. sensitivity long term 105 dB
harmonic distortion at SPL <100Hz 0,8 %
harmonic distortion at SPL >100Hz 0,4 %
Bass driver 1 x 17cm polyprophylen
Midrange driver -
Hf driver 25mm textile neodymium
shielded (anti magnetic) yes
weight 8,4 Kg
dimensions w/h/d in mm 210 x 380 x 250 mm
pair difference +/- 0,5 dB
Electronic BLACK tv HR active
number of amplifier 2
power handling rms Lf/Hf 2 x 100 W
power handling peak Lf/Hf 2 x 120 W
connector type XLR (female)
input impedance 10 kOhm
input sensitivity 16 steps, from 0,45 - 4,5V
X-over fc 1,400 Hz
low pass filter 35 Hz / - 18dB
Hf level control 16 steps, from -4 dB - + 4 dB
Lf gain control 16 steps, from -6 dB - + 4 dB
distortion at acoustic max. output 0,1%
signal to noise ration -102 dB
kind of power supply digital
operating voltage 115/230 V +/- 20%
power consumtion at max. output 180 W
|