[OFF]

uh... nishta......verovatno je do verzije softa.... koja je kod tebe?

EDIT/

V4.10 8th March 2008 New features

* Added spectrum and RTA displays
* Added RT60 graph and added RT60-related traces and info on Impulse graph, can export RT60 data as text via the file -> Export menu
* Added low crest factor pink and white Periodic Noise sequences to the signal generator, with ability to save PN sequence to a WAV file
* A left channel loopback connection can be used as an automatic calibration reference, selected via the soundcard settings as an alternative to using a soundcard cal file
* Added an Analysis Settings option to calculate the response of the reference channel when using a left channel loopback as the ref, response is shown in the soundcard cal trace
* When using the left channel as a calibration reference the system delay is estimated and shown in the Details panel of the measurement info, if the cursor is hovered over the value the equivalent distance in metres and feet is shown in a tooltip
* Measurement start frequency can now be specified, measurements starting at >= 20Hz use a measurement signal that begins at half the start frequency, sweeps starting below 20Hz have an initial linear sweep from DC to 10Hz then log from 10Hz to the end





ja koristio ver 4.0, sad cu ovu novu da skinem