[redroom]

Evo ga, na Moog siteu prva se pojavila pedala MP-201. Cijena jos nije navedena.

MP-201 Multi-Pedal

The Multi-Pedal is a programmable four channel CV/MIDI foot pedal controller. It has four analog control outputs, MIDI In & Out and USB connectivity (MIDI over USB). It can transmit controller information on up to 4 MIDI channels and CV outputs simultaneously.

Each CV output can be programmed individually. Signals can be foot pedal controlled analog control voltages with +/-5V limits, LFO waveforms or GATE voltages (0V=Off,+5V=ON). In addition, each channel can output MIDI CC?s over specified MIDI channels simultaneously with the analog CV outputs.

$0.00 in US dollars.

Output Signals:

- LFO of user programmed RATE, AMOUNT and WAVEFORM (triangle, square, sawtooth, ramp and sample & hold)
- A random NOISE CV
- The footpedal voltage with user selected heel and toe voltages (including reverse action)
- Preset Voltage levels
- LFO signals are scalable and can be synced to MIDI clock, tap tempo, each other, or free-running.

There are five modes of operation:

Single Channel Mode, Quad Channel Mode, Preset Mode, Edit Mode, and Utilities Mode.

Single Channel Mode uses the footswitches to select programs, channels, turn on/off channels, select tap tempo function, enter tap tempo.

Quad Channel Mode turns channels 1-4 on/off with footswitches 1-4 and uses the footpedal as an expression pedal for channels 1 to 4 simultaneously.

Preset Mode defines the user programmable presets. A collection of 4 programmed channels is a preset and there are 100 editable presets.

Edit Mode programs the preset mode.

Utilities Mode accesses the utilities menu for non-preset related functions (SysEx Dump, Upgrade firmware, Factory Restore, Footpedal Calibration, etc?)

Multipedal Control Elements:

Optical ?Gas Pedal? style foot controller

4 footswitches (momentary)

4 LEDs, 1 for each footswitch.16x2 character LCD (Gray Background, transflective, white LED

backlight)

Rotary Encoder with push switch (VALUE, CURSOR)

2 Momentary switches near LCD / Encoder (EDIT, STORE)

Rear Panel Connections:

USB Port (MIDI over USB)

MIDI In, MIDI Out DIN connectors

4 x CV Out ?? TRS connectors (-5V to 5V & 0V to 5V options)

Power in (wall mount power supply included)