Pulsar 2+ na motherboard GIGABYTE GA H55M-S2
 

Moj kompjuter je stigao, ali umesto narucenog ASUS motherboarda, na njemu je postavljen GIGABYTE GA H55M-S2 sa Intel i5 procesorom. Dali neko ima iskustva sa pulsar 2+ u Gigabyte GA H55M-S2 plocu (sa 2 PCI slota i 1 PCe) ?
Dali su kompatibilni ?

Re: Pulsar 2+ na motherboard GIGABYTE GA H55M-S2
 

"If a PC is running on 32 Bit good, it does not mean it runs same
on 64 Bit, because all internal drivers are different.
Also it can run for Firewire, but not for PCI with wrong settings.
Mostly, energy save settings of any kind are the problem.
Your audio PC:
For an audio PC (with little ASIO latency) you have to do some adjustments,
because Core i7, i5, i3 PCs can have ASIO clicks even with little CPU usage
and 25ms latency. At least you should deactivate the following settings
in your PC BIOS :

Intel EIST
Intel C State
C1E Support
Overspeed Protection
Hyperthreading
Execute Bit Support
Set Limit CPUID MaxVal to 3 (maybe not so important)
Intel Virtual Tech
Intel VT-d Tech

In addition the energy save settings of your operating system should be set to maximum.
Our 64 Bit version works perfectly with 4ms, when the PC is set correctly,
with all Scope hardware."

:D

Re: Pulsar 2+ na motherboard GIGABYTE GA H55M-S2
 

Mislim da sam dobio odgovor kada bih ja zelio raditi na 64 bit. Pitanje bih pojednostavio : sa pulsar 2+ zelim da radim na 32 bit, sa Win XP, Cubase SX3, i Scope Fusion Platform 3.1c. Dali ce sve ovo funksionirati na ovom motherboardu ?

Re: Pulsar 2+ na motherboard GIGABYTE GA H55M-S2
 

odgovor si dobio i za 32bit sistem.:wink: u 32bit nema potrebe da cackas po BIOS-u
samo instal win XP ,Scope i vozi:D