Rumski Forum

Rumski Forum (http://www.rumski.com/forum/index.php)
-   DSP forum (http://www.rumski.com/forum/forumdisplay.php?f=103)
-   -   Powercore zamene....? (http://www.rumski.com/forum/showthread.php?t=32832)

OFF 13-02-2010 01:42 PM

Powercore zamene....?
 
Radi li TC zamene staro za novo..... mozda bih menjao svoju staru PCI (ne verujem da ce bit 64bit podrske) za neku slicnu aktualnu kartu?

RokStudio 13-02-2010 03:13 PM

Re: Powercore zamene....?
 
A ovo?

http://forum.tcelectronic.com/viewtopic.php?id=2266

OFF 13-02-2010 08:18 PM

Re: Powercore zamene....?
 
ne mogu da provalim da li vazi i za stari PCI:confused:

OFF 24-02-2010 10:35 PM

Re: Powercore zamene....?
 
nown issues:
Installer:
* separate 32/64 bit install binaries
* installer does not show the readme file

Driver:
* PCI: hardware access fails after sleep (reboot required); issue related to:
* PCI: second attempt to load the driver fails (i.e. uninstall-install combination); reboot required

Application software:
* Messenger not implemented
* CPL does not close on right click from tray

Plug-ins:
* PowerCore X8/6000 problems in getting all 8 DSPs up and run. Reboot of X8/6000 required to make all 8 DSPs show up
* When a plug-in is turned off on the plug-in window in Sonar 8, all audio stops on that channel. Workaround: Turn off the green square in ch. fx.

Hardware/firmware:
* In cases where only 4 DSP?s shows up in CPL, firmware needs to be updated (6000/X8)

Control Panel:
* In some cases, removing plug-ins from the system fails

da li ovo crveno znaci da su ipak dali podrsku za stari PCI ili je nesto drugo po sredi:confused:


All times are GMT +1. The time now is 09:10 PM.

Powered by vBulletin® Version 3.8.12 by vBS
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vB.Sponsors