Rumski Forum - Besplatni protools 10 hd za sve

These are just some steps u canTry!.I have tried alot of solutions on getting rid of dae errors one by one im using windows 8 but this may help some who are having problems running correctly

1.Do not install anything yet get Pro Tools 10.3 Installer (Win) from here
http://secure.digidesign.com/service...rticleId=43572

2.Make sure to have latest ilok drivers here:
www.ilok.com/download-ilok-software.html .You may have to restart after installing.

3.Make sure graphics drivers are up to date.You may have to restart after installing.

4.Make sure sound card drivers are up to date or use aiso4all from here:
http://www.asio4all.com/ i used beta version.

5.Make sure all your hard drives names are short less than 11 characters.

6.Now install all of the above except Pro Tools 10.3 Installer (Win)

7.Open up Cmd go to start choose run type in cmd or right click on start (win choose cmd as admin in the Command prompt , type
bcdedit.exe /set {current} nx AlwaysOff and press Enter.You should see operation successful

To
Enable DEP this is what dev suggests
In the strong>Command prompt , type
bcdedit.exe /set {current} nx Optln and press Enter.You should see operation successful.

Note: I choose always off.If off dosent work choose bcdedit.exe /set {current} nx AlwaysOn and press Enter.

Restart cpu after doing either of these

8.Now unzip Pro Tools 10.3 Installer (Win) choose extract here using winrar.Once extracted you should have a protools folder with setup in it.Instead of using this
go to view at the top (win choose options.To the right of that select view tab. Under advanced settings choose show hidden files and folders and drives.Click apply then ok.

9.Now u will have a folder that says Pro Tools Installer double click open the folder there are 2 files here.(Setup.exe and Avid protools.exe) right click setup first.Choose properties >compatibility >Check the box run this program for windows 7.Then check run as admin at the bottom.Click apply then ok.Now do the same for Avid protools.exe execpt it says run this for previous version of windows.There is no admin option here as its greyed out.

10.Now install using Avid protools.exe,Once done u should have protools HD10 on your desktop right click choose properties>compatibility tab,make sure it says run as admin at the
bottom.

11.Now apply team vr patch. Make sure u run the patch as admin as well.

Troubleshooting steps if none of the above work:

Read the manual!

Protools fails to launch Dae error 13001 once started.Run as admin this is no longer a problem

Hold N key while launching protools for cache prompt raise or lower there..Dae error 9514

Hold shift key down launching protools brings up waves prompt if having problems with waves disable,enable etc.

MF : application has been compromised.Using these steps above this is no longer a problem

If freezes when scanning plugins from Native Instruments (Kontakt 5, Guitar Rig etc)
Using these steps above this is no longer a problem.

All waves plugins work all soundtoys and and ni kontakt battery etc plugs work withought a hitch.

EDIT:Wrapped plugins using vst wrapper make it crash.