Kompijuter ne prepoznaje Yamahu PSR-E403

[Stole1963]

Moj kompijuter ne prepoznaje Yamahu PSR-E403. Pokusao sam sa dva kompijutera. Jedan je laptop Windows Wista, a drugi je desktop Windows XP, ali se dogadja ista stvar kada pokusam da instalisem drajver. Dobijem poruku "Error 25001.No device is connected". Ja sam sinitisajzer spojio sa USB kablom (Sintisajzer USB out - PC USB). Da li neko zna sta se dogadja jer sam tu istu klavijaturu nekada ranije uspjesno spajao sa kompijuterom.
Pozdrav svim clanovima foruma
PS
Pokusavao sam svasta nesto, kao zamena kabla, dva kompijutera, i neke predloge sa foruma, ali nista ne funkcionise.
<DL class=postprofile id=profile107345><DT> (http://www.it4um.com/forum/memberlist.php?mode=viewprofile&u=6418)</DT></DL>

[awacs]

Možda ti ovo pomogne:

There is a Windows issue when you have too many instances of MIDI on your computer. This happens if you do not use the same MIDI ports for your connections (that is, remain consistent). In order to make USB on the computer bulletproof (sic) each time you plug a device into a different port the operating system (Windows) reinstalls the driver. When you reach 10, you can install no more.

Here is a quote from our Yamaha support department
.................................................. .................................................. ....................................

This seems like the problem that happens when the number of MIDI devices has been exceeded in the windows registry.
Unfortunately windows installs a registry entry every time you connect a new device or reconnect an existing device to a different port.
The result is that the registry slots are all used and the new driver will not install...it seems like it does, but it doesn’t work...sound familiar?
Here is the fix. Its not too hard but it takes digging into the registry.

Via ‘Start/Run’, the registry editor can be started by typing in ‘Regedit’. The relevant entries are in the path ‘HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Window s NT\CurrentVersion\Drivers32’ (left part of the window). In the right pane you will see the installed MIDI device driver entries (scroll down). If there is an error/problem, and all 10 entries for MIDI (midi to midi9) have already been created, duplicates can be safely deleted to allow room for the new driver entries.

To be absolutely safe, create a restore point before you launch Regedit. Also remember to save the changes in Regedit when you free up the midi entries.
Once you have freed up an entry, the USB driver will properly install and show up in all the places that have been missing previously.

Neki moj poznanik je skoro imao sličan problem, pa mu je pomoglo.

Pozdrav,

Vasa

[Stole1963]

Hvala Vaso, ali to ne resava problem kod mene jer sam tek uradio reformaciju hard diska i prvi put kad sam pokusao instalaciju drajvera, dobio sam gore navedenu poruku "Error 25001...."

[awacs]

Jbmlg, jesi li siguran da si po?tovao ba? ceo redosled akcija pri instalaciji (kad treba priključiti kabl na klavijaturu, kad treba uključiti klavijaturu i tako redom)?

Pozdrav,

Vasa

[Stole1963]

Prijatelju, pokusavao sam nekolilo puta, ali ne ide.

[darkstar]

Vidi da li je na samoj masini namesten midi out = usb ... ako to postoji na tom modelu.

[Khan]

probaj ovo:
http://www.mediafire.com/file/fgq03z3l4w3j1dl/generic-usb-midi-driver.zip
onda ga manuelno nateraj da koristi ovaj driver, 9 update drv/from the disk/gde si stavio/ izaberes emuxmidi.inf
Mozda se dozove pameti. Da li ti je ovo jedini USB MIDI koji je prikljucen? Win7 nema sansi da ispravno vozi vise od 1...

[Khan]

...Da, prvo drv, pa restart, pa dzamaxa!

[Stole1963]

Probah sve gore navedeno, ali ne ide. Evo koje drivere imam u Device Manager
- Generic USB Hub
- SIS 7001 PC to USB Open Host Controler
- SIS 7001 PC to USB Open Host Controler
- SIS 7001 PC to USB Open Host Controler
- SIS 7001 PC to USB Enhanced Host Controler
- USB Composite Device
- USB Composite Device
- USB Root Hub
- USB Root Hub
- USB Root Hub
- USB Root Hub
To je sve sto imam u Universal Serial Bus Controllers
Nema nikakvih znakova da nesto nije u redu sa driverima, ali kada pokusam instalaciju Yamahinog drivere, u momentu kada bi trebalo da se pojavi "Found new hardware" to se ne desava. Kada pokusam instalaciju sa diska ili sa Web sajta dobijem poruku "Error 25001...". Ispostovao sam kompletnu proceduru po uputsvu ali ne ide.
Hvala svima koji pokusavaju pomoci.

[Stole1963]

"Midi out = USB" Ne ne postoji to na ovom modelu